Align Hone Mains - Replace Caps if necessary, Installation of Steel Main Caps, Bore and Hone Cylinders with Torque Plate, Touch-up Hone for re-ring, Large Overbores and Block Sleeving, Resurface Block Deck parallel to Crank Bore, Thread Oil Galleries for Plugs, Restrict Oil to Lifters, Grind Block for Rod Clearance, Deburr Block, Fill Block, Plug Water Deck Holes, Sonic Test Cylinders (for thickness), New Cam Bearings, R/R Core Plugs, Engine Blueprinting, O Ring Service for Cylinder Block or Head Decks

Clean, Chamfer, Grind, and Polish Cranks, Straighten Most Cranks, Magnaflux and Hot Tank Crank, Radius Crank Counter Weights, Smooth and Deburr, Fill and Smooth Crank Balance Holes Plus Balance; Magnaflux Rods (clean and glassbead), Bush Pin End, Grind for side clearance, Check alignment, New Bolts and Nuts, Hone Big Ends

Pin Fit, Clean and Glassbead, Lock Rings each side including shortening pins, Deepen Valve Pockets, Canted Valve Engines, Modify Piston Dome, Blend Piston Dome and Valve Pockets

Balance assemblies including internal and external, add heavy metal if needed, Balance Flywheel and Pressure Plate

Flywheel Resurfacing, Redrilling, and Lightening, Block and Bellhousing Realign Pins, Motorcycle and Small Engine Machining also available